Julat Pengukuran YM-2 0.96-2.5 Imbangan Lumpur

I.Fungsi

YM-2 Mud Balance is used to determine specific gravity of mud,and it's unit i g/cm³.

II.Parameter asas

Measuring range:0.96-2.5 g/cm³（type YM-2）

Graduation: 0.01 g/cm3 Mud cup volume∶ 140 g/cm² Instrument structure

Jenis YM mud Liquid Densimeter ialah sejenis alat tuas lengan yang tidak sama. Strukturnya ditunjukkan seperti rajah berikut.

penutup cawan lumpur; bilah penutup utama vesikel mendatar; berat; palam; cawan lumpur; gua bilah utama adminikula; pentadbiran; baldi imbangan.

It has a main lever ruler,and a cap blade in the ruler is used as pivot.There is a mud cup with a cap on the left of main lever ruler,and there is a balance bucket witha plug on the right of main lever ruler, the plug is mainly used for rectifying the heavy(lead buttons) which is needed by the balance of lever. Consequently, do not unscrew the plug unless rectifying the instrument. There is a horizontal vesicle on the main lever above the main blade,and it shows that the lever is in a balanced situation when the horizontal vesicle is on the middle position. There is a mobilizable weight on the lever. The screw on the back of weight is used to make the weight remove smoothly on the lever groove. There is a tapped hole on the weight bottom which is used to adjust the weight's weight. Do not unscrew this tapped hole in case inaccuracy of instrument. The main lever ruler is put on the cave of adminicula,so,the ruler can sways flexibly.A support is designed on the adminicula in order to prevent the man ruler over slanted, and the main ruler can rest on this support when the instrument is not on work.

III.Peraturan operasi

1. Tanggalkan penutup cawan lumpur, isikan cawan dengan lumpur yang hendak disukat. Jika terdapat buih dalam lumpur, ketuk cawan lumpur perlahan-lahan sehingga ia menggelegak di atas cawan (goncang cawan lumpur selama 25 kali jika lumpur adalah simen.

2. Letakkan penutup pada cawan lumpur, skru serapat mungkin untuk membuat lebihan lumpur dan udara tersemperit melalui liang kecil di tengah penutup.

3. Lap lumpur pada penutup dan tuil.

4. Letakkan bilah penutup pada gua adminicula, dengan pembaris tuas utama terletak pada sokongan.

5. Gerakkan timbangan dekat dengan bilah utama, kemudian gerakkan timbang perlahan-lahan ke kanan untuk memastikan pembaris tuas utama seimbang (ia boleh diperiksa sama ada vesikel mendatar berada di tengah).

6. Nombor bacaan: tanda semak yang sepadan dengan garis tepi kiri berat ialah graviti tentu lumpur yang diukur.

Cool tags: julat ukuran ym-2 0.96-2.5 neraca lumpur, China, pembekal, pengilang, harga, untuk dijual